Lipoleiti tsa Ceramic ballistic li sebelisoa haholo lits'ebetsong tsa sejoale-joale tsa lihlomo tsa motho le tsa likoloi ka lebaka la ho thatafala ha tsona, matla, le bokhoni ba ho emisa{0}}mehato ea lebelo le phahameng. Har'a litharollo tse fumanehang tsa lihlomo tsa ceramic,Alumina (Al₂O₃)leSilicon Carbide (SiC)ba hlahelletseng bakeng sa ts'ebetso ea bona e netefalitsoeng ea ballistic le melemo ea boima ho feta lihlomo tsa tšepe tsa setso.
Ha ho bapisoa le lipoleiti tsa tšepe, lisebelisoa tsa lihlomo tsa ceramic li fanaho hanyetsa tšusumetso e phahameng, boima bo fokotsehileng, le ho monya matla ho betere, e leng se etsang hore e be tse loketseng sesole,{0}}molao, le likopo tsa tshireletso.
Melemo ea lihlomo tsa Ceramic
Lihlomo tsa setso tsa tšepe li boima ebile li na le tšekamelo ea ho senyeha ha polasetiki nakong ea tšusumetso, e fokotsang katleho ea ballistic.
Ka lehlakoreng le leng, lihlomo tsa ceramic li fana ka boima bo phahameng le ho tiea, ho li lumella ho senya le ho qhala li-projectiles tse kenang ha thepa e tšehetsang (aramid kapa UHMWPE) e nka matla a setseng ho thibela ho kenella.
Sebopeho sena sa lebasetere se finyella matla a ho senya matla le tšireletso e bobebe.
Alumina Ceramic Ballistic Plates
High-alumina e hloekileng (E kholo ho feta kapa e lekana le 99% -Al₂O₃) ke e 'ngoe ea lirafshoa tsa lihlomo tse sebelisoang haholo ka lebaka la litšenyehelo tsa{3}}monyetla oa tsona le bokhoni bo tsitsitseng ba bolo ea maoto. Ts'ebetso e ntle ea phofo le sintering e laoloang e netefatsa sebopeho sa microstructure se nang le porosity e tlase haholo.
Lintlha tsa Bohlokoa - Lipoleiti tsa Alumina Ballistic
| Thepa | Boleng |
|---|---|
| Lintho tse bonahalang | E kholo ho feta kapa e lekana le 99% -Al₂O₃ |
| Ho thatafala | E kholo ho feta kapa e lekana le HRA88 |
| Botenya | E kholo ho feta kapa e lekana le 3.9 g/cm³ |
| Flexural Matla | >350 MPa |
| Tšusumetso e Matla | E kholo ho feta kapa e lekana le 2.2 J/cm² |
| Elastic modulus | >317 GPA |
| Ho Monyeha ha Metsi | Ka tlase kapa ho lekana le 0.02% |
| Ballistic Rating | NIJ Level III + |
Lipoleiti tsa Alumina li sebelisoa haholo lits'ebetsong tsa lihlomo tsa sesole le mapolesa ka lebaka la ts'epo ea tsona le litšenyehelo tse ntle tsa tlhahiso.
Silicon Carbide Ballistic Plates
Silicon carbide (E kholo ho feta kapa e lekana le 98% SiC) e fana ka bothata bo phahameng le ho tiea ho tlase ho feta alumina, e fana ka tšireletso e bobebe e loketseng{1}}libaka tse kotsi.
Lintlha tsa Bohlokoa - Silicon Carbide Ballistic Plates
| Thepa | Boleng |
|---|---|
| Lintho tse bonahalang | E kholo ho feta kapa e lekana le 98% SiC |
| Ho thatafala | E kholo ho feta kapa e lekana le HRA92 |
| Botenya | E kholo ho feta kapa e lekana le 3.1 g/cm³ |
| Flexural Matla | >400 MPa |
| Ballistic Rating | Boemo ba NIJ IV |
Lipoleiti tsa SiC li loketse mabotho a khethehileng, li-unit tsa maqheka, le lihlomo tsa koloi tse hlokang motsamao o ntlafalitsoeng ka tšireletso e phahameng.
Saese & Custom Options
Mefuta e tloaelehileng ea lithaele e kenyelletsa:
| Boholo | Botenya |
|---|---|
| 50 × 50 limilimithara | 10 limilimithara |
| 50 × 25 limilimithara | 10 limilimithara |
Litšebeletso tsa tloaelo li kenyelletsa lipoleiti tse kobehileng, lithaele tse mahlakore a mabeli, le botenya bo etselitsoeng maemo a fapaneng a litšokelo le lisebelisoa tsa lihlomo.
Mabapi le rona
Re na le boiphihlelo ba lilemo tse ka bang 30 mosebetsing oa ho etsa thepa ea letsopa e tsoetseng pele, re fana ka ts'ebetso e phahameng-Alumina le Silicon Carbide ballistic plateska lintlha tse netefalitsoeng tsa tlhahlobo ea ballistic. Lihlahisoa tsa rona li sebelisoa lefatšeng ka bophara hosesole,{0}}molao, tshireletso, le kgahlanong{1}}le merusulikopo tsa ts'ireletso.
Re fana ka tšehetso ea tekheniki le litharollo tse ikhethileng bakeng sa litlhoko tse fapaneng tsa kopanyo ea lihlomo.
